How to perform image upgrade on Cambium PTP550
Image upgrade on the Cambium PTP550 is required to unlock some the features needed to successfully install and test a point to … Read more
Wireless
Cambium PTP550 installation with channel bonding
In this post, I will share with us on how to successfully install a point-to-point link using channel bonding on the Cambium … Read more
Mikrotik CAPSMAN with Vlan and multiple SSID
If you manage an enterprise network with at least one guest network, you need a system that provides centralized management of all … Read more
Setting up Mikrotik CAPSMAN with multiple SSID for CAPs
Mikrotik CAPSMAN with multiple ssid for connected controlled access points (CAPs) can be configured in an environment where roaming is not allowed, … Read more
Use Mikrotik CAPSMAN to manage all access points and enable roaming
You can use the Mikrotik capsman to manage multiple access points and enable roaming between them. This will ensure that users can … Read more
The difference between bandwidth and throughput: a case study of Mikrotik Point-to-Point
Bandwidth and throughput are not the same, even though most people erroneously think otherwise and use then interchangeably. In this post, we … Read more
What to do when a wireless 5Ghz station can not discover a Mikrotik AP
When a wireless 5Ghz station can not discover a Mikrotik AP during signal scan, there are a few troubleshooting steps that can … Read more
What NCC expects you to know before installing a 5Ghz wireless radio
The 5Ghz frequency spectrum is arguably the most popular frequency spectrums. Thanks to the fact it contains the unlicensed frequencies and has … Read more
Simple steps for resetting the Mikrotik SXT wireless outdoor radio
Often times, your radio will malfunction, making it impossible for you to have access to the device. Other times, you can no … Read more
How to use the Mikrotik Nv2 wireless protocol to increase wireless link throughput.
The Nv2 wireless protocol was developed by Mikrotik for use with Atheros 802.11n chips and legacy 802.11a/b/g chips starting from AR5212. The … Read more
Mikrotik wireless: simple access point and station configuration
To have an established end-to-end connection using Mikrotik wireless radios, two sets of equipment will be required: the access point (AP) and … Read more
Mikrotik wireless: Which channel width is best? 20MHz or 40MHz?
Because it is possible to set up a wireless link without knowing much about the various advance parameters that one should enable, … Read more
Ubiquit early access program: See how to be among the first to have access to new products from Ubiquiti
Ubiquiti is one of the world’s largest manufacturers of network devices and over the years, the company has risen to become a … Read more
How to set up a point to point link with massive throughput, using Ubiquity
If you have two or locations apart that you need to connect together quickly, then a point to point setup is definitely … Read more
Wireless connectivity: top three 5Ghz radios for long distance connections
Wireless is the new darling of the industry and understandably so, everyone is jumping at it. For a successful deployment of a … Read more