Mikrotik Multi Area OSPF Configuration
Mikrotik multi area ospf configuration is a skill that must be known and used to conserve processor utilization on Mikrotik routers. One … Read more
Routing
Eigrp authentication and manual route summarization
Eigrp authentication using md5 and manual route summarization on participating eigrp interfaces allow network engineers/administrators to secure their routing table entries while … Read more
How to configure redistribution between eigrp and RIP using Cisco Packet Tracer
In this LAB, I will be sharing with us on how to configure redistribution between eigrp and RIP using the Cisco Packet … Read more
Implement RIP on Packet Tracer for a network topology with three Cisco routers
The routing information protocol is an industry-standard distance vector routing protocol available to all vendors. It is one of the most popular … Read more
How to implement eigrp on a network topology with three Cisco routers
Enhanced Interior Gateway Routing Protocol, popularly known as EIGRP, is a Cisco proprietary advanced distance vector routing protocol. Eigrp uses the diffusing … Read more
Implementing OSPF on a network topology with three Mikrotik routers
This demonstration shows how to successfully implement OSPF on a network topology involving three Mikrotik routers. I will share some of the … Read more
How to force upload traffics through a link using bgp default-originate command
When bgp is configured on a router with dual ISP connections, one of the requirements is to allow all upload traffics through … Read more
Configuring a single-area OSPF for a network topology of three Cisco routers and five networks
The Open shortest Path First (Ospf) is one of the best internal routing protocols deployed by network engineers on enterprise networks. Apart … Read more
IPv6 routing: How to configure EIGRP on IPv6 networks using the Cisco Packet Tracer
Still on the IPv6 routing series, this demonstration will be on how to configure eigrp on IPv6 networks. Everyone talks about the … Read more
IPv6 routing: how to configure IPv6 static routes on a network topology with three routers
Yesterday, I made a post on how to configure static route on a network topology involving three routers. See here. Today, using … Read more
IPv6 routing: how to configure Routing information protocol next generation (RIPng) on Cisco routers.
It’s no longer news that the world is fast moving to an all-IPv6 network known as the internet 2. What is news, … Read more