Categories: MikroTik

Choosing the right router board for your wireless link: RB433 or RB411

Wireless connectivity is fast becoming the ideal medium through which internet service providers deploy internet services to clients, and Mikrotik is at the heart of this. Mikrotik provides high-powered, yet cost-effective 5GHz out-door wireless radios to ISPs and individuals needing connectivity between two or more locations as well as to the internet. Two of the mostly used router boards for point to point or point to multi-point are the RB411 and RB433. In this post, we will look at what set them apart.

 

RB433

While both router boards can be used for wireless connectivity, the type of link being deployed will, to some extent, depend on the board in use. Lets look at the router boards and their capabilities:

RB411:

Router board four hundred series with one wireless interface and an ethernet interface is designed with a powerful Atheros CPU capable of running your wireless link. It is designed with cost and and size in mind; small enough to fit into a small CPE casing.
RB411

 

The RB411 router board is licensed for level 3, making it unsuitable for Point to Multi-point configuration. For a wireless radio to be used as access point to broadcast to multiple stations, the mode has to be set to AP and this unfortunately, is not possible for a level 3 licensed router board. However, it can be used for point to point links by setting the wireless mode to bridge and enabling wireless distribution system (WDS) and as station.
Another thing to look out for when using RB411 is the number of supported hotspot users. If you intend setting up user authentication via hotspot on the router board, then RB411 is obviously not the device for you since it only supports 1 hotspot user at a time. Users can get around this by quickly upgrading their license level to 4 and above but with a RAM of 32MB is it a wise move?

 

RB433:

Router board four hundred series with three wireless interfaces and three ethernet interfaces, is a rugged yet small device that can conveniently fit into a CPE case, making it easy for deployment.
The device is licensed at level 4, making it convenient for point to point and point to multi-point configurations. The license level also qualifies it for up to 200 hotspot users at a time with a RAM size of 64MB. Using the RB433 router board with an omini-directional antenna, network engineers can deploy multiple access points in one CPE case, each with its unique SSID and frequency. Unlike virtual APs, this setup gives higher throughput since each wireless link operates on its own frequency.
In conclusion, apart from the license level, number of supported wireless and ethernet interfaces, and RAM size, both devices have the same storage size (64MB), same number of processor cores (1), same CPU (AR7130), and same CPU nominal frequency (300 MHz) but different price tags. While the RB411 costs about $49, the RB433 can be purchased for $99
Spread the love
Timigate

Recent Posts

Optimize your Metro ethernet with Jumbo MTU

Optimizing Metro Ethernet segments with jumbo MTU (Maximum Transmission Unit) can significantly enhance network performance…

1 week ago

Mikrotik switchOS configuration: a step-by-step guide

MikroTik's SwitchOS is an operating system specifically designed for their line of network switches. It…

1 month ago

Improve your network uptime with VRRP right now

A properly configured VRRP setup does not only track device uptime but also tracks connection…

1 month ago

Have you been configuring NAT the right way on Mikrotik?

Network Address Translation (NAT) is a technique used in networking to map private IP addresses…

1 month ago

Implementing VXLAN over MPLS with Mikrotik

In the ever-evolving landscape of networking technologies, the demand for efficient and scalable solutions has…

2 months ago

Multi-Area OSPF implementation on Mikrotik routers

Setting up Multi-Area OSPF (Open Shortest Path First) on Mikrotik routers involves a few steps.…

2 months ago